San Francisco Pillow Test (SFFC 1103.7.6.1) — 75 dBA at every pillow. Deadline passed; fines are being issued.

Get compliant →

Communication format

3/1, 4/1, 4/2 and other pulse formats

Pulse formats such as 3/1, 4/1 and 4/2 (with variants like 3/1 extended and Sescoa or Radionics low-speed) send an account number and a one- or two-digit event code as counted tone bursts.

Origin

Where Pulse formats comes from

The earliest digital dialer formats, sent as tone bursts at 10, 20 or 40 pulses per second.

How it works

Technical details

  • Very little event detail: a 4/2 report might show only an account number and a two-digit code that the station has to map by hand.
  • Slow and sensitive to line noise; they are among the first formats to fail on VoIP or digital lines.
  • Some universal cellular dialers capture common pulse formats, but support varies widely.

Upgrades

Replacing the phone line

  • Most panels that offer pulse formats also offer Contact ID or SIA. Reprogramming is usually the first step.
  • If a panel only supports pulse formats, it is usually old enough that replacing it costs less over time than keeping it.

Panels

Panels commonly documented with Pulse formats

If a panel reports through a separate communicator, its actual format depends on that equipment.

FAQ

Pulse formats questions

Is 4/2 format still accepted?

Many receivers still accept it, but it gives the operator very little information. We recommend moving to Contact ID or a native IP/cellular format.

Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.