San Francisco Pillow Test (SFFC 1103.7.6.1) — 75 dBA at every pillow. Deadline passed; fines are being issued.

Get compliant →

Caddx / GE / Interlogix NetworX · Intrusion

NX-4 / NX-6 monitoring & upgrades

The NX-4 and NX-6 are the smaller NetworX panels, used in small commercial spaces.

At a glance

Panel details

Manufacturer
Caddx / GE / Interlogix NetworX
Model
NX-4 / NX-6
Family
NetworX
Panel type
Intrusion
Communicator
Built-in dialer.
Documented formats
Contact IDSIAPulse formats

Technical notes

What to know about the NX-4 / NX-6

  • Limited expansion. Replacement is often simpler than upgrading.

Why customers call

Common reasons for a monitoring upgrade

  • Phone line removal
  • Discontinued platform

Phone lines

Telephone line replacement

  • The NX-4 / NX-6's built-in dialer expects a phone line. When the carrier removes copper or moves the line to VoIP, signals can be delayed, partial or lost.
  • We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.

Cellular & IP

Monitoring options

  • Commonly documented formats for this model include Contact ID, SIA, Pulse formats. The format actually in use depends on programming, firmware and any attached communicator.
  • A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
  • For intrusion, cellular with IP backup keeps alarms flowing if one path goes down.

Takeover

Commercial monitoring takeover

  • We inspect the NX-4 / NX-6, confirm programming access and back up the existing settings where possible.
  • We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
  • Every zone and trouble signal is tested end to end before we close out the job.

See commercial intrusion monitoring.

FAQ

NX-4 / NX-6 questions

Can Fireside monitor my Caddx / GE / Interlogix NetworX NX-4 / NX-6?

In most cases, yes. We check the NX-4 / NX-6's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.

What happens to my NX-4 / NX-6 when the phone line is removed?

Its built-in dialer can't reach the central station, so signals stop or become unreliable. A cellular or IP communicator restores reporting.

What format does the NX-4 / NX-6 report in?

Commonly documented options are Contact ID, SIA, Pulse formats. The actual format depends on programming and any attached communicator, so we confirm it on site.

Related

Other Caddx / GE / Interlogix NetworX panels

Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.