Moose Security · Intrusion
Z1100 series monitoring & upgrades
The Moose Z1100 series is the most common Moose panel still found in the field, usually in small commercial buildings.
At a glance
Panel details
- Manufacturer
- Moose Security
- Model
- Z1100 series
- Family
- Moose Z-series
- Panel type
- Intrusion
- Communicator
- Built-in dialer. Formats depend on revision and must be confirmed on site.
- Documented formats
- Contact IDPulse formats
Technical notes
What to know about the Z1100 series
- Documentation is scarce. We confirm programming access before quoting a communicator-only upgrade.
Why customers call
Common reasons for a monitoring upgrade
- Unknown programming
- Phone line removal
- Panel replacement
Phone lines
Telephone line replacement
- The Z1100 series's built-in dialer expects a phone line. When the carrier removes copper or moves the line to VoIP, signals can be delayed, partial or lost.
- We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
Cellular & IP
Monitoring options
- Commonly documented formats for this model include Contact ID, Pulse formats. The format actually in use depends on programming, firmware and any attached communicator.
- A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
- For intrusion, cellular with IP backup keeps alarms flowing if one path goes down.
Takeover
Commercial monitoring takeover
- We inspect the Z1100 series, confirm programming access and back up the existing settings where possible.
- We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
- Every zone and trouble signal is tested end to end before we close out the job.
FAQ
Z1100 series questions
Can Fireside monitor my Moose Security Z1100 series?
In most cases, yes. We check the Z1100 series's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.
What happens to my Z1100 series when the phone line is removed?
Its built-in dialer can't reach the central station, so signals stop or become unreliable. A cellular or IP communicator restores reporting.
What format does the Z1100 series report in?
Commonly documented options are Contact ID, Pulse formats. The actual format depends on programming and any attached communicator, so we confirm it on site.
Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.
