Caddx / GE / Interlogix NetworX · Intrusion
NX-8 monitoring & upgrades
The Caddx/GE NX-8 is an eight-zone-expandable NetworX panel found in offices and retail.
At a glance
Panel details
- Manufacturer
- Caddx / GE / Interlogix NetworX
- Model
- NX-8
- Family
- NetworX
- Panel type
- Intrusion
- Communicator
- Built-in dialer. Universal cellular communicators are the usual upgrade.
- Documented formats
- Contact IDSIAPulse formats
Technical notes
What to know about the NX-8
- No manufacturer support since Interlogix left the market.
- Keypad bus devices are available only as remaining stock or used.
Why customers call
Common reasons for a monitoring upgrade
- Phone line removal
- Discontinued platform
- Takeover
Phone lines
Telephone line replacement
- The NX-8's built-in dialer expects a phone line. When the carrier removes copper or moves the line to VoIP, signals can be delayed, partial or lost.
- We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
Cellular & IP
Monitoring options
- Commonly documented formats for this model include Contact ID, SIA, Pulse formats. The format actually in use depends on programming, firmware and any attached communicator.
- A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
- For intrusion, cellular with IP backup keeps alarms flowing if one path goes down.
Takeover
Commercial monitoring takeover
- We inspect the NX-8, confirm programming access and back up the existing settings where possible.
- We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
- Every zone and trouble signal is tested end to end before we close out the job.
FAQ
NX-8 questions
Can Fireside monitor my Caddx / GE / Interlogix NetworX NX-8?
In most cases, yes. We check the NX-8's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.
What happens to my NX-8 when the phone line is removed?
Its built-in dialer can't reach the central station, so signals stop or become unreliable. A cellular or IP communicator restores reporting.
What format does the NX-8 report in?
Commonly documented options are Contact ID, SIA, Pulse formats. The actual format depends on programming and any attached communicator, so we confirm it on site.
Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.
