Silent Knight · Fire
SK-5820XL monitoring & upgrades
The Silent Knight SK-5820XL is an addressable panel used in mid-size commercial and school buildings.
At a glance
Panel details
- Manufacturer
- Silent Knight
- Model
- SK-5820XL
- Family
- 5800-series
- Panel type
- Fire
- Communicator
- Built-in dialer. A listed cellular/IP communicator is the usual upgrade.
- Documented formats
- Contact IDSIAPulse formats
Technical notes
What to know about the SK-5820XL
- Point-level reporting depends on the dialer programming.
Why customers call
Common reasons for a monitoring upgrade
- Copper line retirement
- Takeover
Phone lines
Telephone line replacement
- The SK-5820XL's built-in dialer expects a phone line. When the carrier removes copper or moves the line to VoIP, signals can be delayed, partial or lost.
- We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
- For fire alarm monitoring, the replacement path must meet NFPA 72 and the local fire authority's requirements. Some jurisdictions require a permit or acceptance test.
Cellular & IP
Monitoring options
- Commonly documented formats for this model include Contact ID, SIA, Pulse formats. The format actually in use depends on programming, firmware and any attached communicator.
- A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
- For fire signals, we use communicators listed for fire alarm service and dual-path (cellular plus IP) options where appropriate.
Takeover
Commercial monitoring takeover
- We inspect the SK-5820XL, confirm programming access and back up the existing settings where possible.
- We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
- Every zone and trouble signal is tested end to end before we close out the job.
Fire alarm
Fire alarm monitoring
- Alarm, supervisory and trouble signals are monitored 24/7 by a UL-Listed central station.
- Replacement communicators are listed for fire alarm service and installed to meet NFPA 72 and local fire authority requirements.
- We can also handle annual inspection and testing for the same system.
Learn more about commercial fire alarm monitoring.
FAQ
SK-5820XL questions
Can Fireside monitor my Silent Knight SK-5820XL?
In most cases, yes. We check the SK-5820XL's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.
What happens to my SK-5820XL when the phone line is removed?
Its built-in dialer can't reach the central station, so signals stop or become unreliable. A cellular or IP communicator restores reporting.
What format does the SK-5820XL report in?
Commonly documented options are Contact ID, SIA, Pulse formats. The actual format depends on programming and any attached communicator, so we confirm it on site.
Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.
