San Francisco Pillow Test (SFFC 1103.7.6.1) — 75 dBA at every pillow. Deadline passed; fines are being issued.

Get compliant →

FBII (FBI) XL · Fire/Burglary

XL-4 monitoring & upgrades

The FBII XL-4 is a larger XL panel sometimes used for combined fire and burglary in older commercial buildings.

At a glance

Panel details

Manufacturer
FBII (FBI) XL
Model
XL-4
Family
FBII XL
Panel type
Fire/Burglary
Communicator
Built-in dialer. Fire use requires a listed communicator path.
Documented formats
Contact IDPulse formats

Technical notes

What to know about the XL-4

  • When the fire zones are active, the monitoring path must meet fire code.
  • Replacing it often makes more sense than adding a communicator.

Why customers call

Common reasons for a monitoring upgrade

  • The fire authority flagged the phone line
  • Panel failure

Phone lines

Telephone line replacement

  • The XL-4's built-in dialer expects a phone line. When the carrier removes copper or moves the line to VoIP, signals can be delayed, partial or lost.
  • We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
  • For fire alarm monitoring, the replacement path must meet NFPA 72 and the local fire authority's requirements. Some jurisdictions require a permit or acceptance test.

Cellular & IP

Monitoring options

  • Commonly documented formats for this model include Contact ID, Pulse formats. The format actually in use depends on programming, firmware and any attached communicator.
  • A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
  • For fire signals, we use communicators listed for fire alarm service and dual-path (cellular plus IP) options where appropriate.

Takeover

Commercial monitoring takeover

  • We inspect the XL-4, confirm programming access and back up the existing settings where possible.
  • We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
  • Every zone and trouble signal is tested end to end before we close out the job.

See fire alarm system takeover.

Fire alarm

Fire alarm monitoring

  • Alarm, supervisory and trouble signals are monitored 24/7 by a UL-Listed central station.
  • Replacement communicators are listed for fire alarm service and installed to meet NFPA 72 and local fire authority requirements.
  • We can also handle annual inspection and testing for the same system.

Learn more about commercial fire alarm monitoring.

FAQ

XL-4 questions

Can Fireside monitor my FBII (FBI) XL XL-4?

In most cases, yes. We check the XL-4's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.

What happens to my XL-4 when the phone line is removed?

Its built-in dialer can't reach the central station, so signals stop or become unreliable. A cellular or IP communicator restores reporting.

What format does the XL-4 report in?

Commonly documented options are Contact ID, Pulse formats. The actual format depends on programming and any attached communicator, so we confirm it on site.

Related

Other FBII (FBI) XL panels

Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.