Moose Security · Intrusion
Z900 monitoring & upgrades
The Moose Z900 is an older, smaller Moose panel. Units still in service are usually decades old.
At a glance
Panel details
- Manufacturer
- Moose Security
- Model
- Z900
- Family
- Moose Z-series
- Panel type
- Intrusion
- Communicator
- Built-in dialer. Older revisions may support only pulse formats.
- Documented formats
- Pulse formatsContact ID
Technical notes
What to know about the Z900
- If only pulse formats are available, replacing the panel is usually recommended.
Why customers call
Common reasons for a monitoring upgrade
- Pulse-only reporting
- Panel age
Phone lines
Telephone line replacement
- The Z900's built-in dialer expects a phone line. When the carrier removes copper or moves the line to VoIP, signals can be delayed, partial or lost.
- We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
Cellular & IP
Monitoring options
- Commonly documented formats for this model include Pulse formats, Contact ID. The format actually in use depends on programming, firmware and any attached communicator.
- A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
- For intrusion, cellular with IP backup keeps alarms flowing if one path goes down.
Takeover
Commercial monitoring takeover
- We inspect the Z900, confirm programming access and back up the existing settings where possible.
- We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
- Every zone and trouble signal is tested end to end before we close out the job.
FAQ
Z900 questions
Can Fireside monitor my Moose Security Z900?
In most cases, yes. We check the Z900's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.
What happens to my Z900 when the phone line is removed?
Its built-in dialer can't reach the central station, so signals stop or become unreliable. A cellular or IP communicator restores reporting.
What format does the Z900 report in?
Commonly documented options are Pulse formats, Contact ID. The actual format depends on programming and any attached communicator, so we confirm it on site.
Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.
