San Francisco Pillow Test (SFFC 1103.7.6.1) — 75 dBA at every pillow. Deadline passed; fines are being issued.

Get compliant →

Fire-Lite · Fire

MS-9600UDLS monitoring & upgrades

The MS-9600UDLS is a larger Fire-Lite addressable panel with a built-in DACT. It is used in schools, offices and multifamily buildings.

At a glance

Panel details

Manufacturer
Fire-Lite
Model
MS-9600UDLS
Family
MS-9600
Panel type
Fire
Communicator
Built-in DACT. Fire-Lite and third-party listed IP/cellular communicators are common upgrades.
Documented formats
Contact IDSIAPulse formats

Technical notes

What to know about the MS-9600UDLS

  • Point-level reporting depends on the DACT programming.
  • A large device count means careful testing after a communicator change.

Why customers call

Common reasons for a monitoring upgrade

  • Copper line retirement
  • Monitoring takeover
  • Annual inspection findings

Phone lines

Telephone line replacement

  • The MS-9600UDLS's built-in dialer expects a phone line. When the carrier removes copper or moves the line to VoIP, signals can be delayed, partial or lost.
  • We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
  • For fire alarm monitoring, the replacement path must meet NFPA 72 and the local fire authority's requirements. Some jurisdictions require a permit or acceptance test.

Cellular & IP

Monitoring options

  • Commonly documented formats for this model include Contact ID, SIA, Pulse formats. The format actually in use depends on programming, firmware and any attached communicator.
  • A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
  • For fire signals, we use communicators listed for fire alarm service and dual-path (cellular plus IP) options where appropriate.

Takeover

Commercial monitoring takeover

  • We inspect the MS-9600UDLS, confirm programming access and back up the existing settings where possible.
  • We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
  • Every zone and trouble signal is tested end to end before we close out the job.

See fire alarm system takeover.

Fire alarm

Fire alarm monitoring

  • Alarm, supervisory and trouble signals are monitored 24/7 by a UL-Listed central station.
  • Replacement communicators are listed for fire alarm service and installed to meet NFPA 72 and local fire authority requirements.
  • We can also handle annual inspection and testing for the same system.

Learn more about commercial fire alarm monitoring.

FAQ

MS-9600UDLS questions

Can Fireside monitor my Fire-Lite MS-9600UDLS?

In most cases, yes. We check the MS-9600UDLS's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.

What happens to my MS-9600UDLS when the phone line is removed?

Its built-in dialer can't reach the central station, so signals stop or become unreliable. A cellular or IP communicator restores reporting.

What format does the MS-9600UDLS report in?

Commonly documented options are Contact ID, SIA, Pulse formats. The actual format depends on programming and any attached communicator, so we confirm it on site.

Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.