San Francisco Pillow Test (SFFC 1103.7.6.1) — 75 dBA at every pillow. Deadline passed; fines are being issued.

Get compliant →

Ademco / Honeywell VISTA · Fire/Burglary

VISTA-128FBP / 250FBP monitoring & upgrades

The VISTA-128FBP and 250FBP are commercial combined fire and burglary panels. They put fire detection and intrusion on one panel, which changes how the communicator must be listed and installed.

At a glance

Panel details

Manufacturer
Ademco / Honeywell VISTA
Model
VISTA-128FBP / 250FBP
Family
VISTA FBP commercial fire/burg
Panel type
Fire/Burglary
Communicator
Built-in dialer. The fire monitoring path must meet NFPA 72 and local fire authority requirements.
Documented formats
Contact IDSIAPulse formats

Technical notes

What to know about the VISTA-128FBP / 250FBP

  • Because the panel monitors fire, the replacement communicator must be listed for fire alarm use.
  • Fire and burglary events need separate response instructions at the central station.

Why customers call

Common reasons for a monitoring upgrade

  • The fire marshal flagged the phone line or a failed test
  • Phone line removal
  • A combined fire and burglary takeover

Phone lines

Telephone line replacement

  • The VISTA-128FBP / 250FBP's built-in dialer expects a phone line. When the carrier removes copper or moves the line to VoIP, signals can be delayed, partial or lost.
  • We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
  • For fire alarm monitoring, the replacement path must meet NFPA 72 and the local fire authority's requirements. Some jurisdictions require a permit or acceptance test.

Cellular & IP

Monitoring options

  • Commonly documented formats for this model include Contact ID, SIA, Pulse formats. The format actually in use depends on programming, firmware and any attached communicator.
  • A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
  • For fire signals, we use communicators listed for fire alarm service and dual-path (cellular plus IP) options where appropriate.

Takeover

Commercial monitoring takeover

  • We inspect the VISTA-128FBP / 250FBP, confirm programming access and back up the existing settings where possible.
  • We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
  • Every zone and trouble signal is tested end to end before we close out the job.

See fire alarm system takeover.

Fire alarm

Fire alarm monitoring

  • Alarm, supervisory and trouble signals are monitored 24/7 by a UL-Listed central station.
  • Replacement communicators are listed for fire alarm service and installed to meet NFPA 72 and local fire authority requirements.
  • We can also handle annual inspection and testing for the same system.

Learn more about commercial fire alarm monitoring.

FAQ

VISTA-128FBP / 250FBP questions

Can Fireside monitor my Ademco / Honeywell VISTA VISTA-128FBP / 250FBP?

In most cases, yes. We check the VISTA-128FBP / 250FBP's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.

What happens to my VISTA-128FBP / 250FBP when the phone line is removed?

Its built-in dialer can't reach the central station, so signals stop or become unreliable. A cellular or IP communicator restores reporting.

What format does the VISTA-128FBP / 250FBP report in?

Commonly documented options are Contact ID, SIA, Pulse formats. The actual format depends on programming and any attached communicator, so we confirm it on site.

Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.