San Francisco Pillow Test (SFFC 1103.7.6.1) — 75 dBA at every pillow. Deadline passed; fines are being issued.

Get compliant →

Communication format

SIA DC-03 (SIA Format)

SIA format sends text-like event codes (two-letter codes such as BA for burglary alarm or FA for fire alarm) using FSK modem tones. Commercial panels and central stations use it because it carries more detail than pulse formats.

Origin

Where SIA comes from

Published by the Security Industry Association as the DC-03 standard.

How it works

Technical details

  • Uses 110-baud FSK modem signaling, not DTMF, so the receiver line card has to support SIA.
  • Two-letter event codes plus zone numbers make reports readable without a lookup table.
  • Newer variants (SIA DC-09) carry SIA or Contact ID messages over IP, which is how many modern communicators deliver events.

Upgrades

Replacing the phone line

  • Not every universal capture communicator supports SIA FSK. Many panels can be reprogrammed to Contact ID before installing a cellular dialer.
  • Where the panel supports it, a manufacturer IP or cellular module that sends SIA DC-09 keeps the full event detail.

Panels

Panels commonly documented with SIA

If a panel reports through a separate communicator, its actual format depends on that equipment.

FAQ

SIA questions

Is SIA the same as Contact ID?

No. Both are SIA-published standards, but Contact ID uses DTMF numeric codes while SIA DC-03 uses FSK modem tones and two-letter event codes.

Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.