San Francisco Pillow Test (SFFC 1103.7.6.1) — 75 dBA at every pillow. Deadline passed; fines are being issued.

Get compliant →

Edwards / EST · Fire

EST3 monitoring & upgrades

EST3 is Edwards' large networked fire and life-safety platform for high-rises, hospitals and campuses.

At a glance

Panel details

Manufacturer
Edwards / EST
Model
EST3
Family
EST3
Panel type
Fire
Communicator
Commonly reports through a 3-MODCOM or separate communicator. The format depends on that equipment.
Documented formats
Contact IDSIA

Technical notes

What to know about the EST3

  • Networked panels mean programming changes affect the whole system. We coordinate updates carefully.
  • Voice evacuation and smoke control may be on the same network.

Why customers call

Common reasons for a monitoring upgrade

  • Copper line retirement
  • Takeover of a high-rise or campus

Phone lines

Telephone line replacement

  • The EST3 usually reports through a separate communicator, so the phone-line replacement is planned around that device, not the panel.
  • We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
  • For fire alarm monitoring, the replacement path must meet NFPA 72 and the local fire authority's requirements. Some jurisdictions require a permit or acceptance test.

Cellular & IP

Monitoring options

  • Commonly documented formats for this model include Contact ID, SIA. The format actually in use depends on programming, firmware and any attached communicator.
  • A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
  • For fire signals, we use communicators listed for fire alarm service and dual-path (cellular plus IP) options where appropriate.

Takeover

Commercial monitoring takeover

  • We inspect the EST3, confirm programming access and back up the existing settings where possible.
  • We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
  • Every zone and trouble signal is tested end to end before we close out the job.

See fire alarm system takeover.

Fire alarm

Fire alarm monitoring

  • Alarm, supervisory and trouble signals are monitored 24/7 by a UL-Listed central station.
  • Replacement communicators are listed for fire alarm service and installed to meet NFPA 72 and local fire authority requirements.
  • We can also handle annual inspection and testing for the same system.

Learn more about commercial fire alarm monitoring.

FAQ

EST3 questions

Can Fireside monitor my Edwards / EST EST3?

In most cases, yes. We check the EST3's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.

What happens to my EST3 when the phone line is removed?

The separate communicator that reports for the panel loses its line. We replace or reprogram that communicator to use cellular or IP.

What format does the EST3 report in?

Commonly documented options are Contact ID, SIA. The actual format depends on programming and any attached communicator, so we confirm it on site.

Related

Other Edwards / EST panels

Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.