San Francisco Pillow Test (SFFC 1103.7.6.1) — 75 dBA at every pillow. Deadline passed; fines are being issued.

Get compliant →

Edwards / EST · Fire

QuickStart QS1 / QS4 monitoring & upgrades

Edwards QuickStart panels are compact addressable systems used in small and mid-size buildings.

At a glance

Panel details

Manufacturer
Edwards / EST
Model
QuickStart QS1 / QS4
Family
QuickStart
Panel type
Fire
Communicator
Reporting depends on the panel's dialer option or separate communicator.
Documented formats
Contact IDSIA

Technical notes

What to know about the QuickStart QS1 / QS4

  • Programming changes may require Edwards configuration software.

Why customers call

Common reasons for a monitoring upgrade

  • Copper line retirement
  • Takeover

Phone lines

Telephone line replacement

  • How the QuickStart QS1 / QS4 reports depends on the installed communicator module or separate device. We confirm it on site before planning the replacement.
  • We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
  • For fire alarm monitoring, the replacement path must meet NFPA 72 and the local fire authority's requirements. Some jurisdictions require a permit or acceptance test.

Cellular & IP

Monitoring options

  • Commonly documented formats for this model include Contact ID, SIA. The format actually in use depends on programming, firmware and any attached communicator.
  • A universal cellular communicator that captures the dialer, or a manufacturer-native cellular/IP module, is usually the simplest option.
  • For fire signals, we use communicators listed for fire alarm service and dual-path (cellular plus IP) options where appropriate.

Takeover

Commercial monitoring takeover

  • We inspect the QuickStart QS1 / QS4, confirm programming access and back up the existing settings where possible.
  • We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
  • Every zone and trouble signal is tested end to end before we close out the job.

See fire alarm system takeover.

Fire alarm

Fire alarm monitoring

  • Alarm, supervisory and trouble signals are monitored 24/7 by a UL-Listed central station.
  • Replacement communicators are listed for fire alarm service and installed to meet NFPA 72 and local fire authority requirements.
  • We can also handle annual inspection and testing for the same system.

Learn more about commercial fire alarm monitoring.

FAQ

QuickStart QS1 / QS4 questions

Can Fireside monitor my Edwards / EST QuickStart QS1 / QS4?

In most cases, yes. We check the QuickStart QS1 / QS4's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.

What happens to my QuickStart QS1 / QS4 when the phone line is removed?

The separate communicator that reports for the panel loses its line. We replace or reprogram that communicator to use cellular or IP.

What format does the QuickStart QS1 / QS4 report in?

Commonly documented options are Contact ID, SIA. The actual format depends on programming and any attached communicator, so we confirm it on site.

Related

Other Edwards / EST panels

Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.