San Francisco Pillow Test (SFFC 1103.7.6.1) — 75 dBA at every pillow. Deadline passed; fines are being issued.

Get compliant →

Legacy manufacturer

Edwards / EST monitoring & upgrades

Edwards / EST fire alarm systems (now part of Carrier's Edwards line) range from the compact QuickStart and EST2 panels to large networked EST3 systems.

Background

About older Edwards / EST panels

EST3 systems usually report through a communicator module such as the 3-MODCOM, and older IRC-3 systems often use a separate DACT. The format depends on the communicator.

We confirm communicator hardware and programming, then plan a listed cellular or IP path. On networked EST3 systems, programming changes must be coordinated carefully with the whole network.

Panel families

Models we monitor and upgrade

Families: EST2 · EST3 · QuickStart QS1 / QS4 · Edwards IRC-3

Formats

Reporting formats seen on these panels

Services

How Fireside helps

  • Monitoring takeover for existing Edwards / EST systems, including programming backup and full signal testing.
  • Phone line replacement with cellular or dual-path IP and cellular communicators.
  • Commercial fire alarm monitoring with listed communicators that meet NFPA 72 and local fire authority requirements.
  • A straight recommendation to keep, upgrade or replace, based on the panel's condition and support.

FAQ

Edwards / EST questions

My EST3 system reports through a 3-MODCOM. Does that change?

The 3-MODCOM can usually stay. What changes is the telephone line it uses. We replace that with a listed cellular or IP path, or add a communicator, after checking the system.

Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.