Legacy manufacturer
DMP (Digital Monitoring Products) monitoring & upgrades
DMP panels are widely used for commercial intrusion and fire/burglary systems. Older 1512 and 1912 command processors and early XR-series panels are still running in many banks, schools and commercial buildings.
Background
About older DMP (Digital Monitoring Products) panels
DMP panels report natively in DMP's DD format to DMP-compatible receivers. Many also support Contact ID, and later XR panels add network and cellular reporting.
Fireside is an authorized DMP dealer. We can often keep newer XR panels in service with DMP communicators, or replace older 1500/1900-series panels with current XR panels that reuse existing wiring.
Panel families
Models we monitor and upgrade
Families: DMP 1512 · DMP 1912 · XR2400F · XR500 / XR500N · XR200 / XR100 / XR40 / XR20
Services
How Fireside helps
- Monitoring takeover for existing DMP (Digital Monitoring Products) systems, including programming backup and full signal testing.
- Phone line replacement with cellular or dual-path IP and cellular communicators.
- Commercial fire alarm monitoring with listed communicators that meet NFPA 72 and local fire authority requirements.
- A straight recommendation to keep, upgrade or replace, based on the panel's condition and support.
FAQ
DMP (Digital Monitoring Products) questions
Can you upgrade a DMP 1912 without rewiring?
In many buildings, yes. A current DMP XR panel can often reuse the existing zone wiring, keypad runs and devices after testing.
Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.
