DMP (Digital Monitoring Products) · Intrusion
XR40 / XR20 monitoring & upgrades
The DMP XR40 and XR20 are early, smaller XR panels found in small commercial spaces.
At a glance
Panel details
- Manufacturer
- DMP (Digital Monitoring Products)
- Model
- XR40 / XR20
- Family
- Early XR
- Panel type
- Intrusion
- Communicator
- Built-in dialer. Communicator support is more limited on these earlier XR panels.
- Documented formats
- DMP DDContact ID
Technical notes
What to know about the XR40 / XR20
- Replacement with a current XR panel is often more practical than adding a communicator.
Why customers call
Common reasons for a monitoring upgrade
- Panel age
- Copper line retirement
Phone lines
Telephone line replacement
- The XR40 / XR20's built-in dialer expects a phone line. When the carrier removes copper or moves the line to VoIP, signals can be delayed, partial or lost.
- We test signals to the central station before and after the change, so you have a record that every alarm, trouble and supervisory signal arrives.
Cellular & IP
Monitoring options
- Commonly documented formats for this model include DMP DD, Contact ID. The format actually in use depends on programming, firmware and any attached communicator.
- Because this panel may use a manufacturer-specific format, we usually prefer a manufacturer-compatible cellular or network path, or reprogramming to a format the new communicator supports.
- For intrusion, cellular with IP backup keeps alarms flowing if one path goes down.
Takeover
Commercial monitoring takeover
- We inspect the XR40 / XR20, confirm programming access and back up the existing settings where possible.
- We move the account to Fireside's UL-Listed central station and set up your call list and dispatch instructions.
- Every zone and trouble signal is tested end to end before we close out the job.
FAQ
XR40 / XR20 questions
Can Fireside monitor my DMP (Digital Monitoring Products) XR40 / XR20?
In most cases, yes. We check the XR40 / XR20's condition, programming access and reporting format on site, then recommend whether to keep it with a new communicator or replace it.
What happens to my XR40 / XR20 when the phone line is removed?
Its built-in dialer can't reach the central station, so signals stop or become unreliable. A cellular or IP communicator restores reporting.
What format does the XR40 / XR20 report in?
Commonly documented options are DMP DD, Contact ID. The actual format depends on programming and any attached communicator, so we confirm it on site.
Related
Other DMP (Digital Monitoring Products) panels
Model and format information comes from manufacturer documentation and field experience. Panel revisions, firmware, programming and attached communicators change what a specific system can do, so Fireside confirms every system on site before quoting. Fire alarm monitoring changes must meet NFPA 72 and local fire authority requirements.
